Beta
×

Welcome to the Slashdot Beta site -- learn more here. Use the link in the footer or click here to return to the Classic version of Slashdot.

Thank you!

Before you choose to head back to the Classic look of the site, we'd appreciate it if you share your thoughts on the Beta; your feedback is what drives our ongoing development.

Beta is different and we value you taking the time to try it out. Please take a look at the changes we've made in Beta and  learn more about it. Thanks for reading, and for making the site better!

Comments

top

DARPA Uses Preteen Gamers To Beta Test Tomorrow's Military Software

Plazmid DARPA wanted kids to design drones (84 comments)

A while back DARPA had the Adaptive Vehicle Make(AVM) project which was to combat the exponentially growing cost of military hardware development by implementing an opensource hardware hackerspace/fablab style model(with more buzzwords than I desire to recall).

Part of this project was MENTOR(another huge acronym), which was going to set up schools with their own makerspaces and have students "compete against one another in the development of cyber-electro-mechanical systems of moderate complexity such as go carts, mobile robots, small unmanned aircraft, etc."

However, the official goal of the program really was to "to teach the principles of model-based design and distributed foundry-style manufacturing to build a next-generation cadre of manufacturing innovators."

Which is a laudable goal and probably does more to defend our country than designing a new tank or fighter jet.

And honestly, how awesome would it be to bring back shop class and modernize it?

Unfortunately, it was never moved beyond a pilot program when AVM got cancelled for it being redundant with Obama's manufacturing initiative.

about two weeks ago
top

Otherlab Working on a 'Fundamental Jump' in Technology for Exoskeletons (Video)

Plazmid Theres a reason why pneumatic aren't used as much (36 comments)

The big reason why pneumatics aren't used as much in robotics is that air is very compressible, which leads to all sorts of nastiness when you make pneumatic actuators.

Because air is compressible, compressing air is not very efficient compared to say hydraulics. This is bad for exoskeletons.

The other problem is that the compressibility of air limits the 'bandwidth,' or how fast these actuators can actuate and un-actuate controllably, achievable with these actuators. In addition, the bandwidth of pneumatic actuators is often below the frequency of human walking, making them impractical most exoskeleton applications.

And of course, there's more to it than compressibility at play here that could make these actuators impractical. Since these actuators use a rubber membrane, these actuators are subject to hysteresis, significant temperature effects, and creep.

Rubber, when stretched and unstretched quickly, heats up causing the rubber to change it's stiffness. In addition, the temperature of the rubber can also change due the air being pumped into them. Rubber, and other elastomers, also experiences a phenomenon known as creep, where it slowly stretches out with time. In fact, current industrial pneumatic muscles NEVER actuate exactly the same because of all this, and one has to use interesting control approaches.

I am also skeptical that this will be cheaper in practice than mass produced electric actuators. While the actuators themselves are cheap, the valves and other hardware necessary to control them are not. The actuators themselves will certainly wear out sooner than electric actuators(>10 years continuous operation for robot arm actuators) due to the creep mentioned above. With lower efficiency and increased maintenance costs the overall cost of using these could very well be higher.

In fact, the brushless motor in the compressor they show in the video probably can provide" 25% of the power of a normal human elbow," and the only reason it can't be used on a human elbow is that much of that power is at high-speed with low torque. If someone were to develop a compact and efficient gearbox for turning high speed- low torque into low speed-high torque, then one could mass produce it and skip all the pneumatic silliness.(Or just do what that company that robotics google just bought did and use watercooling/overclocking)

about 2 months ago
top

UK Ballistics Scientists: 3D-Printed Guns Are 'of No Use To Anyone'

Plazmid Re:3D Printing is Not Just Glorified Glue Guns (490 comments)

Well technically 3D printing refers to the process of using an inkjet, the very same inkjet from a regular printer, to deposit a binder on a layer of powder. 3D printing is just one Additive Manufacturing process.

Now DMLS and Laser Sintering(SLS is a trademark of a particular company) aren't quite yet ready for consumers yet.

Laser sintering of plastic requires inert gas, messy plastic powder, and messes up if temperature varies even a tiny bit(sintering scales with T^4). Messy doesn't even begin to describe how dirty these machines are. You can almost taste the powder in the air near these machines.

DMLS uses explosive metal powder, requires inert gas, and a pretty dangerous laser. But the real kicker to DMLS that makes it ill suited for the consumer market is the support removal. In order to prevent the printed parts from deforming and to dissipate heat, one has to print supports in. In other words, after printing you have to go in and do a bunch of sanding and dremeling to remove METAL supports from the part!

LOM is pretty much just for making stuff out of paper, so one probably wouldn't be able to make a very good gun with it.

SLA can really only do plastics and ceramics. And doing ceramics requires a special kiln.

However, SLA might be coming to the consumer market due to it's simplicity, speed(there's indications these machines could print very fast), and resolution.

about 3 months ago
top

UK Ballistics Scientists: 3D-Printed Guns Are 'of No Use To Anyone'

Plazmid Re:Humbug... (490 comments)

The technology will improve, BUT fabbers capable of actually printing a working uzi aren't likely to be something everyone would have in their home.

Plastic is not a good material for making firearms, especially 3d printed plastic, which currently has worse mechanical properties than injection molding.

Sure 3d printers can print metal and ceramics, but they are not something every normal person would want in their home. They either require explosive metal powder, large amounts of power, a precision kiln, or inert gases.

This is much the same with CNC machines today, most people don't have a big CNC machine in their garage, aside from the fact they're expensive, they're messy!

about 3 months ago
top

UK Ballistics Scientists: 3D-Printed Guns Are 'of No Use To Anyone'

Plazmid No need to cripple 3d printing then! (490 comments)

Since they have found these guns are completely useless, then hopefully they won't enact legislation to require all 3d printers have crippling DRM that makes it impossible to print guns.

Or maybe they might, but given that they now have a government study that say these guns are useless, it's gonna be a lot harder(I hope) for scare-mongering politicians to cripple or ban 3d printing

about 3 months ago
top

Ford Will Demo Solar-Charged Car At CES

Plazmid Re:concept cars .. (179 comments)

This ignores the point of concept cars. Those solar panels aren't generating power so much as hype.

about 8 months ago
top

Ford Will Demo Solar-Charged Car At CES

Plazmid Re:(tsk tsk tsk) The poor puddy tat... (179 comments)

So the question we all want to know is can this actually happen?

Will a bird/cat/rodent be fried when they enter the beam?

Well we know the car roof has an area of 1.5 square meters and the lens provides 10 times the energy that would fall on the car roof. Using standard insolation of 1000 watts/m^2, we can deduce that the solar radiation flux on the car after the lens is 10000 watts/m^2.

So is this enough to fry a cat? The answer is.... yes, but it wouldn't happen instantly! According to wolfram alpha 10000 watts/m^2 is 10 times the radiation flux necessary to cause harm to biological tissue!

This is also in the range to singe holes in black pieces of paper!

Worst case, our poor puddy cat will probably make it out with some singed fur, but should otherwise be all right!

about 8 months ago
top

Ford Will Demo Solar-Charged Car At CES

Plazmid Re: Hope it doesn't melt the car! (179 comments)

First, those pennies aren't made of nickel, they're made of copper coated zinc.

Second, pennies don't melt when exposed to a fresnel lens of that size, they VAPORIZE! Or at least the zinc does anyway

about 8 months ago
top

Hotel Tycoon Seeks Property Rights On the Moon

Plazmid Re:Apples and oranges. (248 comments)

Well, we have plenty of technologies for dealing with highly abrasive materials and operating in highly abrasive environments.

Take for instance the concrete pump, it's a device that moves a slurry of fine(and many times not so fine) particles at high rates of speed with a decent MTBF.

We have cars, trucks, and mining equipment that can operate with a decent MTBF in abrasive and sandy environments

We have helicopters that have to deal with operation in sand environments, where blades and other fast moving components essentially get sand blasted!

And there has been some recent work on lunar regolith tolerant connectors.

Now the bigger issue that we have isn't that the dust is abrasive, but that we can't model how the dust behaves! Granular materials like lunar regolith do not have scaling laws. Thus, we can't make small scale 'wind tunnel tests' on systems that handle granular materials, the only way to test is at full scale.

So when someone wants to build a new type of concrete plant, they test it out at near full scale and tweak it until it works, because we have no good way to computationally model it before hand. And even then, most concrete plants and other systems that handle granular materials do not work very well. They tend to experience jams and other problems which must be fixed with regular maintenance.

And we don't know why they jam or even in some cases why they work in the first place!

Thus we'd have trouble building a 'concrete plant' on the Moon without impractically large expenses, because we don't understand dust.

about 9 months ago
top

Hotel Tycoon Seeks Property Rights On the Moon

Plazmid Re:Now this sounds like a perfect job for (248 comments)

The solar proton flux is really, really, really, really low, even during a solar flare! We're talking 10s of protons per square centimeter at best here.

 

about 9 months ago
top

Hotel Tycoon Seeks Property Rights On the Moon

Plazmid Re:Now this sounds like a perfect job for (248 comments)

That is not a lot of water. 600 million cubic meters is roughly the volume of Sydney harbor. In human terms, this is certainly quite a bit of water, however, this water is spread out over a very large area. This makes getting sufficient amounts of water difficult, especially in cold, shadowed craters(no solar power!).

about 9 months ago
top

Hotel Tycoon Seeks Property Rights On the Moon

Plazmid Re:No, he can't own the moon. He can take it thoug (248 comments)

The Moon has no resources we don't have on Earth, however, it has them 'cheaper.'

Building a large structure in space like an orbital resort or a solar power satellite from materials sent from Earth would be impractically expensive. However, if one gets this material from the Moon, these sorts of structures become a lot more practical.

It is a lot less energetically intensive to launch a kilogram of something from the Moon(hard vacuum, low gravity) than it is to launch a kilogram of something from the Earth(air, high gravity). Just compare the Apollo Lunar Lander to a Proton rocket bound for the International Space Station.

Now as for mining the Moon as opposed to asteroids:
1. asteroids are typically quite a bit farther out than the Moon
2. the lunar environment is fairly well characterized: we have 382 kg of near pristine samples of lunar material, while we have only micrograms of samples of asteroidal material.
3.we know how to mine stuff in gravity, we currently do not know how to mine stuff in microgravity

about 9 months ago
top

Hotel Tycoon Seeks Property Rights On the Moon

Plazmid Re:Now this sounds like a perfect job for (248 comments)

Only problem is that the Moon lacks large amounts of water and carrying said water to the Moon would be energetically costly.

about 9 months ago
top

Hotel Tycoon Seeks Property Rights On the Moon

Plazmid Re:It's quite impractical, I'm afraid... (248 comments)

Making something dust tight in a vacuum environment can't be all that hard. We have standards for preventing dust intrusion and they aren't all that different from standards for preventing water intrusion.

And we do have a way to clean dust off equipment in a hard vacuum. Moon dust easily picks up an electrostatic charge, allowing one to use an alternating electric field to remove regolith from solar panels.

The same technology, shouldn't be all that hard to integrate into space suits or other equipment.

about 9 months ago
top

NASA's Robonaut Gets Its Legs; Could a Moonwalk Be In Its Future?

Plazmid it's a girl! (63 comments)

Robonaut's legs are designed for walking around the space station in microgravity, so they would be useless in gravity

BUT, the same people working on robonaut are building a female humanoid robot for the DARPA robotics challenge, which could very well walk on the moon

about 10 months ago
top

Typhoon Haiyan Continues To Scourge Southeast Asia

Plazmid it's a girl! (114 comments)

Robonaut's legs are designed for walking around the space station in microgravity, so they would be useless in gravity

BUT, the same people working on robonaut are building a female humanoid robot for the DARPA robotics challenge, which could very well walk on the moon

about 10 months ago
top

6TB Helium-Filled Hard Drives Take Flight

Plazmid Re:Great... (297 comments)

Except that hydrogen can do some [a href="http://en.wikipedia.org/wiki/Hydrogen_damage#Shatter_cracks.2C_flakes.2C_fish-eyes_and_micro_perforations"]rather nasty things to metals[/a].

Although, hard drives don't get very hot or experience high stresses, so it might not effect it.

about 10 months ago
top

Insect-Inspired Flying Robot Handles Collisions And Keeps Going

Plazmid Re:Incorrect (61 comments)

Except the part in the video where they have it go in a constant direction in a forest using on board magnetometers.

about 10 months ago
top

Redesigned Seats Let Airlines Squeeze In More Passengers

Plazmid Re:It not logical Captain (466 comments)

Given that the average body weight in the United States is 164 pounds and we have 6 passengers, we have an added weight of 984 pounds. Less than the 1200 pounds saved. This does not take into account the weight of luggage however.

Now ideally one would have the passengers pay according to their weight at takeoff, but I'm sure many people would find this unacceptable.

There is no such thing as negligible weight on an aircraft.

about 10 months ago

Submissions

Plazmid hasn't submitted any stories.

Journals

Plazmid has no journal entries.

Slashdot Login

Need an Account?

Forgot your password?

Submission Text Formatting Tips

We support a small subset of HTML, namely these tags:

  • b
  • i
  • p
  • br
  • a
  • ol
  • ul
  • li
  • dl
  • dt
  • dd
  • em
  • strong
  • tt
  • blockquote
  • div
  • quote
  • ecode

"ecode" can be used for code snippets, for example:

<ecode>    while(1) { do_something(); } </ecode>