Welcome to the Slashdot Beta site -- learn more here. Use the link in the footer or click here to return to the Classic version of Slashdot.

Thank you!

Before you choose to head back to the Classic look of the site, we'd appreciate it if you share your thoughts on the Beta; your feedback is what drives our ongoing development.

Beta is different and we value you taking the time to try it out. Please take a look at the changes we've made in Beta and  learn more about it. Thanks for reading, and for making the site better!



Why Nissan Is Talking To Tesla Model S Owners

StarWreck Re:Odd (335 comments)

You're right, the Leaf most directly competes with the Volt or even the Prius.

Leaf's biggest problem is their thermal management is under-engineered. Both the Volt and the Tesla have much more thoroughly engineered thermal management systems. It may use up some of the range keeping the battery warm/cool depending on outside conditions but it does a great job keeping the battery from losing half its maximum capacity after only a year.

about 7 months ago

Revolutionary Scuba Mask Creates Breathable Oxygen Underwater On Its Own

StarWreck Re: So what happens to the hydrogen? That's usable (375 comments)

Why is this marked insightful? Mod this down! Fish gills separate oxygen that's been dissolved in water. They do not separate oxygen from the water molecule!

about 8 months ago

Record Wind Power Levels Trigger Energy Price Fall Across Europe

StarWreck Re:bfd (226 comments)

Moses Lake, Washington has a 2.5 cents/kWh industrial rate. Commercial rate less than 5 cents. Its all hydroelectric.

about 8 months ago

Coca-Cola Reserves a Massive Range of MAC Addresses

StarWreck Vending Machines of Soda Fountains? (371 comments)

I remember Coca-Cola looked into credit card readers for their vending machines during the 1996 Olympics in Atlanta and the credit card fees back then made the concept completely untenable. I'd be willing to bet a buck that this has more to do with their Coca-Cola Freestyle fountains which automatically phone home whenever a flavor cartridge is low or empty. There might be a ridiculously huge rollout all at once of the machines, like at McDonalds. So far they've only been installed at a few test McDonalds and a few other chains that don't have nearly the coverage of McD's.

about 9 months ago

Japanese Aircraft-Carrying Super Submarine From WWII Located Off Hawaii

StarWreck Re: Japanese, your Lord ! (123 comments)

None of the companies mentioned are owned wholly by international banks. Each of them are publicly traded companies. Anyone can own them.

about 9 months ago

Electric Cars: Drivers Love 'Em, So Why Are Sales Still Low?

StarWreck Re:It's the whole "getting stranded" thing (810 comments)

So when you run out of hydrogen, driving around looking for a non-existent hydrogen fuel station, you're somehow not going to have to pay that $300 for a tow?

A fuel cell is just a different type of battery.

about 10 months ago

Electric Cars: Drivers Love 'Em, So Why Are Sales Still Low?

StarWreck Re:dirty and not affordable (810 comments)

Give me coal any day, what have you got against the hillbillies working their butts off in Appalachia? You insensitive clod!

about 10 months ago

Electric Cars: Drivers Love 'Em, So Why Are Sales Still Low?

StarWreck Re:2 Words (810 comments)

It can't be that far off, they've already got an EV that's similar size, luxury, features and price to a full size luxury car.

about 10 months ago

NHTSA Tells Tesla To Stop Exaggerating Model S Safety Rating

StarWreck Re:Up next: "Zero Emissions" claim (284 comments)

You foolish mortal. Properly formatted tags are invisible.

about 10 months ago

Germany Finances Major Push Into Home Battery Storage For Solar

StarWreck Re:so green (282 comments)

I'd done the research myself already. Wood is way more expensive than natural gas unless you grow your own... and Trees take a lot of space and time to grow. And thats an awful lot of work to plant them and then harvest them. I've seen systems that use pellets made from the sawdust swept up from sawmills. That is a lot more cost effective than cut wood.

about 10 months ago

WRT trans fats, the FDA should ...

StarWreck Re:Outright bans (376 comments)

The problem with DDT was that it was too safe. Since it was "safe" people thought they could bathe entire cities in the stuff so thick it looked like the inside of a fumigation tent. Then the cancers started happening.

If used like a normal pesticide, ie just where its needed in small doses, that the average joe realizes is unsafe to squirt up ones nose, DDT is actually safer that the stuff you buy at Wal-Mart.

about 10 months ago

RAF Pilots Blinded At 1000 Mph By Helmet Technical Glitch

StarWreck So What Did You Do Today? (154 comments)

So what did you do today?

Oh nothing, just flew 1000 MPH completely blind.

about 10 months ago

My favorite season:

StarWreck Re:Favorite color (346 comments)

740 million if you count non-native speakers. Now, do you suppose people taking English classes in Asia learn American English or British English?

about a year ago

Is It Time to Replace Your First HDTV? (Video)

StarWreck Out of Date Info (418 comments)

His information is a bit out of date. He said 4K Blu-Ray was still in development. However, you can already buy 4K Blu-Ray players. You can also buy a very limited selection of 4K Blu-Ray discs like Ghost Busters. That being said, the prices for all the equipment required is still going to be overpriced for at least a couple more years and there still won't be a whole lot of content available for a couple more years. So wait a couple years before buying into 4K.

1 year,8 days

Germany Produces Record-Breaking 5.1 Terawatt Hours of Solar Energy In One Month

StarWreck Not Subsidies but Close (687 comments)

Obviously there are subsidies to encourage buying solar panels. However, whats really burning the utilities is how the pricing is worked out in Germany. The utilities have to pay top tier price for small scale solar power (ie if you have solar panels on your roof, generating an excess). The way the ends up working is that each kilowatt hour your neighbors put into the grid, the more you have to pay to pull power from the grid. More solar power drives the price up.

I don't see how this can last long term. California has a much more common sense approach - equal pricing. The utilities have to pay you back equal to what you would pay.

Most other US states, the utilities can pay you back less than they charge you.

1 year,29 days

China Has a Massive Windows XP Problem

StarWreck Re:Keeping XP For Legacy Games? (520 comments)

I used to spend a LOT of time tweaking settings in Win 98 to get ancient DOS games working right, getting the sound working, getting strange types of DOS era "virtual memory" setup. Even for a lot of Win 95 era games, you'd have to change your Win 98 colors back down to 256 or things like animations wouldn't work. DOSbox has made things so much easier.

about a year ago

China Has a Massive Windows XP Problem

StarWreck Re:Make their own OS? (520 comments)

They did release their own OS, a crappy one based on Ubuntu. Nobody uses it.

about a year ago

Compared to my 1st computer's memory ...

StarWreck Re:Missing alternative (587 comments)

awesome, our RAM histories match!

about a year ago

Head-mounted displays / sensors like Google Glass are:

StarWreck Oblig Dr Who Reference (321 comments)

We need google glass to fight the silence!

about a year ago

Interactive Raycaster For the Commodore 64 Under 256 Bytes

StarWreck Re:Will this run . . . (143 comments)

I would bet it would run on the VIC-20. Maybe not the .C64 disk image but the source code. VIC-20 had only 5K RAM but it had a full 6502 CPU. Although they have entirely different video chips.

about a year ago



Journalist arrested by Interpol for Tweet

StarWreck StarWreck writes  |  more than 2 years ago

StarWreck (695075) writes "Police in Kuala Lumpur detained Hamza Kashgari, 23, "following a request made to us by Interpol" on behalf of the Saudi authorities. Kashgari, a newspaper columnist, fled Saudi Arabia after posting a tweet which read: "I have loved things about you and I have hated things about you and there is a lot I don't understand about you I will not pray for you." Said tweet sparked outrage in Saudi Arabia and resulted in multiple death threats. Kashgari faces the death penalty in Saudi Arabia."
Link to Original Source




StarWreck StarWreck writes  |  more than 9 years ago Its actually been done for a while. Just forgot about this thing on Slashdot. Here's the final report in a nice little PDF: Report and here's a little movie in DivX 5.2 Movie


Works and Refinement Continues at Record Pace

StarWreck StarWreck writes  |  more than 9 years ago The record and playback features of the RC car are in great working order. The car can record what it does for a maximum of between 20 seconds and 4 minutes (depending on resolution). Over 4 minutes as a maximum record time and it begins to lose control. I'm in the process of turning the whole thing into VCR and TV combo like controls. It'll have "Play(back), Record, Stop, Pause (works with both playback and record), and Play(live - same as record but dosen't record).

Did a bunch of work with the Java server, the GPRS can connect to it and the sever stores whatever is transmitted to it. Need to get the HC08 to properly transmit the GPS data to the GPRS modem.


Possible Snag

StarWreck StarWreck writes  |  more than 9 years ago Today we moved our newly written code onto the TPM2 module (5 channels) so we can use 4 to capture both throttle and steering (2 channels each, one for rising edge and one for falling edge) and moved all the output code to TPM1 (3 channels) so we can use 1 channel each for outputting the signal to both the steering and the throttle.

We may have run into a snag though...
We programmed the record and playback feature. We programmed the board to record until it runs out of ram and then playback. It actually works! We still need to get it to run at the correct speed in playback mode though and it only records about 25 seconds... We may be running out of RAM space to run the program. 4K of RAM only goes so far. Andre thinks it may be because we're using a demo compiler, it may limit the space we can use until we shell out a bunch of money for it. I'm not sure though. We may need to find ways to optimize our code further.


Edge Capture Working

StarWreck StarWreck writes  |  more than 9 years ago Finished Writing the code to get the 68HC08 micro-controller to capture both rising and falling edges, determine the time between them that is a logic HIGH (this is based on the number of clock cycles the processor has went through divided by a prescalar), and then calculate the hex value that will result in duplicating the same duty cycle with a logic HIGH and outputting it to a TPM channel. After working out some kinks in the code (if the rising edge is near maximum number of the counter the falling edge will be near ZERO resulting in a "twitch"), its working smoothly. The wheels turn in both directions super fast and very smoothly with lightning fast response... a simple IF statement removed the "twitch". Next up on the agenda: recording the signal so we can "replay" a path.



StarWreck StarWreck writes  |  more than 9 years ago Got the serial connection between the motorolla board and our GPS module working. Turns out the 2 bits which controlled parity in the serial control register were for generating parity bits (i.e. creating new content), not for configuring the serial ports for communication... seeing as the GPS module was already creating a parity bit for odd parity, we were ending up with 2 parity bits - confusing the hell out of the software. As soon as we set both bits to ZERO, we were able to get communication.

Andre received the GPRS modem with the breakout board and antenna in the mail today. The SMA to MMC connector he already had was the wrong size on Antenna side so we were unable to use the Antenna. I put in an order for the correct adaptor and its being mailed to Andre.

Using the same UART breadboard we built to do initial testing on the GPS module, we hooked up the GPRS modem to a serial port on the school's computer. Loaded up Hyper-Terminal: Com1, 9600 baud, etc... typed "AT"... and got the response "OK"... yaay! something finally works right off the bat. The GPRS has auto-bauding, but it says to ensure accurate communication to manually set the baud once you're inside. Typed "AT-BR=9600" to manually set up the baud-rate (I think that was the command anyway) and got the response "OK". My cell-phone's SIMM card was inside and we typed the AT command to determine whether it was password protected... it wasn't so we skipped the password steps and got to the check network status. Even without the antenna it was able to detect a( or several) network(s) but it was not allowed to connect to them. It could be because I don't have GPRS as part of my plan. Tried the same thing with Sophe's and Andre's SIMM card and got the same result each time.

One of us needs to sign up for GPRS access and we need to hook up the antenna once Andre gets the adaptor in the mail.

One small piece of bad-news, Andre ordered the digital thermometer at the same time as the GRPS modem so we went ahead and opened up the casing. Apart from the LCD module which displays the temperature, there's just 1 connector at the bottom... a serial connector. ARGH! Our GPS module uses a serial connector, our GPRS modem uses a serial connector, and now the thermometer is going to use a serial connector. The motorolla board only has 2 serial connectors. Hopefully we can manually wire in a UART and turn a standard port into a serial port but I have a feeling we won't be able to.


REVO... Revo... revo

StarWreck StarWreck writes  |  more than 9 years ago Did the first "formal review" for our car. Demonstrated the Micro-Controller turning the wheels left and right instead of the Remote Control Receiver. Did a pointless power-point presentation that had a couple of pictures, some of our flow-chart, and a couple examples of the code we're using.

After the review, tried all day to get the GPS to come in 1 serial port, and go out the other... again. Its been a whole week now! We did make some minor progress, however, we got the hardware configuration of the interface between the GPS module and the micro-controller down correct beyond any reasonable doubt. Unfortunately it still dosen't work... so it HAS TO BE the program. Sophy sent an email to me:

"The microcontroller uses a uart chip. You can't do it with a uart chip, you have to use a usart because the gps module sends out burst of transmissions every second. It uses synchronized serial communication and you would need a 8251 USART chip."


Small Auto-RC Update

StarWreck StarWreck writes  |  more than 9 years ago I Cleaned up the code a bit. Its not exactly object oriented, but at least everything is out of the main function... Finally got around to testing the GPS module by wiring it directly to a UART Circuit Andre built onto a bread board. He soldered a loose serial connector onto the UART and we ran a serial cable into one of the school's computers... anything Andre wires is staying well away from the serial port on my laptop. Using a couple of TSIP (the protocol our GPS module uses to communicate) programs we were definately able to get some information out of the thing. The problem is, it was being powered by a laboratory power supply bolted to the table. The data-sheet for the GPS module clearly says you can't pick up crap from the satelites while inside. Despite this we were able to pick up a couple of satelites... unfortunately it still wasn't enough to give us even any kind of longitude or latitude. Its now my job to wire something together that is exactly 3.3 volts and portable so we can drag it outside to test. The 3.47 volt cell phone battery DID NOT WORK! I've never heard of something being so picky. We disconnected the UART and hooked the GPS back up to the micro-controller to get back to coding. Unfortunately Andre mixed up the ground and power cables. The GPS module which ordinarily draws 0.078 amps at 3.3 volts was drawing 3.5 amps at the same voltage... needless to say it warmed up a bit before we noticed and corrected it. Fortunately there was no magic smoke and once it cooled down it started to work again. Everything we've tried to get the serial communication to work has failed miserably. Anyone know about 6808 coding? Specifically 68HC08GB60!


Automated REVO Update

StarWreck StarWreck writes  |  more than 9 years ago Rewrote the code for the Motorolla micro-controller in C... using 2 different PWM channels and outputting the idle signal for steering on one channel and outputting idle for throttle on the other. The board has no trouble producing both signals simultaneously.


Automated RC Car

StarWreck StarWreck writes  |  more than 9 years ago So far the RC Car is coming along nicely. Andre and I finished writing the assembly for the motorolla chip so when you pulse port A1 low it turns right and when you pulse port A2 low it turns left. The wiring job we did was pretty shoddy but it was only for basic testing, when we are ready for open road testing we'll be sure to put it together a little bit better. The servos for the steering, shifting, and throttle are all using pulse-width modulation, all with only 1ms duty cycle difference between the maximum and minimum values. Luckily, pulse-width modulation lets you use any frequency you want as long as the period is long enough for you to squeeze in adequate duty cycles. The original radio receiver used 50Hz singals (20ms period) and we're using closer to 300Hz (if I remember right less than 4ms period). We could only get it down to that frequency because the maximum scalar divisor for the output is 128... so to get a lower output frequency we would have to lower the speed of the processor. The motorolla chip can go anywhere from less than 1MHz to 40MHz, if we get it much lower than 18MHz the signal starts to freak out... like the board is having trouble generating it. We're just lucky that the frequency we got it down to works perfectly with all the servos.

Next up, sending GPS data over a GPRS cellular modem to an SQL database via the internet and then pulling up the data with a GUI on an internet connected computer.


RC Car Update

StarWreck StarWreck writes  |  more than 9 years ago Andre and I tweaked the code a little bit. We changed the 8-bit analog-to-digital convertor to 10-bit and decreased the delay, this resulted in the servos running more smoothly.

Also finally completed the calculations of converting our desired duty cycle in mili-seconds to the appropriate hex value based on the frequency of the signal being output. I'll see if I can post the equation in a future journal. Changed the hex values in 3 places for each servo, so now the steering will turn dead-center when you power on the car and it can only turn so far in each direction... the servos can turn more than the gears allow them to. Don't want to burn them out. Andre calculated so precisely that the steering stops turning at the exact moment the pulse-width stops increasing or decreasing. Very effective coding.


StarWreck StarWreck writes  |  more than 10 years ago Everyone dosen't like things that smell bad, but perhaps they will like things that don't smell so bad as long as they have a good disposition.

Slashdot Login

Need an Account?

Forgot your password?

Submission Text Formatting Tips

We support a small subset of HTML, namely these tags:

  • b
  • i
  • p
  • br
  • a
  • ol
  • ul
  • li
  • dl
  • dt
  • dd
  • em
  • strong
  • tt
  • blockquote
  • div
  • quote
  • ecode

"ecode" can be used for code snippets, for example:

<ecode>    while(1) { do_something(); } </ecode>